Chief Operating Officer - COO
Making plans for a new house or a renovation? The choice of the appropriate door frame (chokhat) is one of the most neglected but critical choices. Durability, material and cost may differ significantly in the life of your doors. Homeowners, contractors, and builders in Pakistan can always be interested in understanding the current price trends of Chokhat as prices keep fluctuating. Here, this is a guide where we will detail each of the kinds of chokhat and compare pricing and allow you to make an informed choice.
A door frame is not just a support for your door. It impacts:
Choosing the right chokhat not only ensures durability but also complements your Modern House Design Trends.
Metal frames are good because of their strength and less maintenance. They suit well in busy places and office buildings. The most popular metal used in Pakistan is iron, steel and aluminum.
For commercial and high-security projects, it is important to use steel that meets national quality benchmarks defined by the Pakistan Standards and Quality Control Authority.
Iron frames are the cheapest of all costs, with an estimated average of 2,500 to 4,500 PKR of a standard 7×3 ft door frame. They are hard and can hold heavy doors but they can easily rust unless they are coated. This renders them inapplicable to humid regions unless anti rust paint is applied to them. Although iron frames are cheaper, they need maintenance in order to last.
Steel frames are a notch higher in the aspects of durability and cost. A frame of 7×3 ft costs between 3,500 and 6,000 PKR. They are good in deformation resistance, are very secure and have a life span of up to 25 years and need minimum maintenance. Compared to iron, steel is heavier and therefore installation can be a little bit more complicated. Residential and commercial doors made of steel are usually popular with the builders due to its cost-effectiveness when it comes to durability.
Aluminum frames will be high-end with the range of 6,500 to 10,000 PKR effective in standard frames. Aluminum is light, does not corrode and is easy to install. It is ideal in coastal or damp areas where rust is an issue. The increased cost can be explained by low maintenance and extended life expectancy. Modern sleek looks that are preferred by most modern houses are also provided through aluminum frames.
| Material | Durability | Price Range (PKR) | Pros | Cons |
| Iron | Medium | 2,500 – 4,500 per 7×3 ft | Strong, cheap | Prone to rust |
| Mild Steel | High | 3,500 – 6,000 per 7×3 ft | Durable, long-lasting | Heavier |
| Aluminum | Very high | 6,500 – 10,000 per 7×3 ft | Lightweight, rust-resistant | Expensive |
Wood can be considered the most traditional option, which is elegant and beautiful in nature. They are very popular in the construction of homes due to their natural beauty. Popular types of wood in Pakistan are teak, sheesham and MDF/HDF composite.
The highest quality is the teak frames, which range between 12,000 to 18,000 PKR as the standard 7×3 ft frames. Teak is very strong, resistant of termites and naturally waterproof. Its grains and color are very rich and that is why it is a preferred choice in luxury houses. Maintenance is through the occasional polishing of keeping it shiny. The frames made of teak may be durable up to decades, as the cost is higher, so teak may be considered a long-term investment.
The next material is sheesham, which is a medium-priced substitute, with prices between 8, 000 to 12,000 PKR on the average frame. It is solid, beautiful natural grain, and is moderate moisture resistant. Sheesham is less maintenance demanding than MDF but more so than teak. It can be used both inside and outside and is appropriately finished.
MDF and HDF are engineered wood that costs between 4,500 and 7,000 PKR. They are cheap and simple to paint though prone to moisture damage. These frames can be used in interior doors or any other places where one would need the frames that look like wood but do not have the high prices.
| Wood type | Durability | Price Range (PKR) | Pros | Cons |
| Teak | Very high | 12,000 – 18,000 per 7×3 ft | Premium, termite-resistant | Expensive |
| Sheesham | High | 8,000 – 12,000 per 7×3 ft | Durable, beautiful grain | Needs polishing |
| MDF/HDF | Medium | 4,500 – 7,000 per 7×3 ft | Budget-friendly, paintable | Less durable, moisture-sensitive |
Fiber Reinforced plastics (FRP) or Wood Plastic Composite (WPC) are becoming popular. These frames are currently becoming more popular because of their resistance to termites, water resistance and the fact that they have a long life.
| Material | Durability | Price Range (PKR) | Pros | Cons |
| Fiber/ WPC | High | 6,000 – 9,500 per 7×3 ft | Water & termite resistant, lightweight | Limited color options |
The cost of chokhats in Pakistan depends on multiple factors:
Knowing the standard sizes helps estimate cost accurately:
| Door Type | Width | Height | Thickness |
| Residential | 30 – 36 inches | 78 – 84 inches | 1.5 – 2 inches |
| Interior | 28 – 32 inches | 78 inches | 1.5 inches |
| Commercial | 36 – 48 inches | 84 – 96 inches | 2 – 2.5 inches |
Builders should always measure openings carefully to avoid additional costs for non-standard sizes.
| Door Type | Width | Height | Thickness |
| Iron | 3,500 | Moderate | 10 -15 years |
| Steel | 4,500 | Low | 20 -25 years |
| Aluminum | 8,000 | Very low | 25+ years |
| Teak Wood | 15,000 | Medium | 25+ years |
| Sheesham Wood | 10,000 | Medium | 20 – 25 years |
| MDF/HDF | 6,000 | High | 10 – 15 years |
| Fiber/WPC | 7,500 | Very low | 20 – 25 years |
Builders can choose material according to project budget and location. MDF or iron works for cost-effective projects, while teak, steel, or fiber/WPC suits premium construction.
The selection of the correct chokhat is not only the selection of a material, but it influences the safety, durability, aesthetics, and price. To obtain precise material quality, availability, and pricing advice, builders and homeowners may refer to GharHub experts to know that they will be investing in durable door frames.
CTA Button: Learn more by exploring GharHub
Between 3,500 – 6,000 PKR per standard 7×3 ft frame.
Frames (teak or WPC) are strongly recommended because they are not affected by moisture.
Use primer and paint coating to prevent rust; avoid direct water exposure.
They are indeed durable, termite-proof and can be used in most residential and commercial applications.
Your trusted partner for premium construction materials. Building dreams, one project at a time.
© Copyright – Gharhub | 2019 – 2026 All Rights Reserved.